JetBot Professional Version ROS AI Kit, Dual Controllers AI Robot, Lidar Mapping, Vision Processing

This is a high-performance AI Jetbot for people who learn and develop the ROS system. It adopts the ROS system and two controllers: the microcontroller of Raspberry Pi RP2040 and the AI host controller of JETSON-NANO-DEV- KIT-A. As the expansion board integrates OLED, servo motor drive circuit, battery protection circuit, the audio output circuit and so on, you do not need to weld the circuit. It can be charged without unloading, so you do not need to remove the batteries repeatedly. It features the built-in IMU posture sensor, and the DC encoder motor controls the rotating speed through PID, which can output wheel odometry data. In terms of the software, it is compatible with NVIDIA JetBot open source project program, supports AI deep learning, SLAM mapping and navigation, OpenCV visual processing, intelligent voice interaction, etc.

Features

• Onboard 3 x 2600mah 18650 batteries, its voltage output is up to 12.6V with stronger motor power.
• Onboard S-8254AA + AO4407A lithium battery protection circuit, it can prevent overcharge, over-discharge, overcurrent, and has short circuit protection.
• The onboard INA219 is convenient for real-time monitoring of battery voltage and charging current.
• With 0.91-inch 128 × 32 resolution OLED, it can display real-time data from the car, such as IP address, memory, battery power, etc.
• Featured MPU9250 IMU posture sensor, the direction of the robot can be accurately judged.
• With the coded DC gear motor, it supports PID debugging and outputs wheel odometry data.
• With Raspberry Pi RP2040 dual-core micro-controller, it has better real-time performance and higher accuracy in control.
• Adopting the ROS system and a series of visual software, it can be developed more.
• Support I2C slave mode control, it is fully compatible with NVIDIA JetBot open source project program without porting and is easy to achieve AI functions such as obstacle avoidance and autonomous line tracking.

It meets the needs of scientific research algorithm verification in various fields such as Lidar mapping, autonomous navigation, autonomous self driving, intelligent speech, target detection, face recognition, etc. It is not only compatible with the NVIDIA Jetbot open-source project program, but also is overall upgraded in hardware with better performance.

                                                                       IMU Sensor

Built-In High-Precision 9-Axis Motion Attitude Sensor, Using Extended Kalman Filter To Merge Wheel Odometer And IMU Data, Can Produce Higher-Precision Robot Attitude

                                                    360 Degree Laser Ranging Lidar

                     360-Degree Scanning And Ranging Of The Surrounding Environment To Obtain A Contour Map Around The Robot

                                                                8MP 160 FOV Camera

Package Contains:

• 1 x Jetson Nano 4GB B01 Dev Kit
• 1 x Cardboard Case
• 1 x JetBot ROS chassis
• 1 x JetBot ROS expansion board
• 1 x RPLIDAR A1
• 2 x High power encoder motor
• 1 x Acrylic piece
• 1 x Wireless-AC8265 with antennas
• 1 x IMX219-160 Camera
• 1 x Acrylic camera spacer
• 1 x 1-inch caster
• 1 x Cooling fan
• 1 x 65mm Tire
• 1 x Wireless gamepad
• 1 x USB adapter
• 1 x Camera holder
• 2 x PH2.0 6PIN Cable
• 1 x 12.6V 2A battery charger
• 2 x 6mm hole Coupler
• 4 x Coupler screws
• 1 x Mini cross wrench sleeve
• 1 x Spanner
• 1 x Allen Spanner
• 1 x Screwdriver 2PCS
• 1 x Screws pack